top of page

Stationary Single-Spring Single Cartridge Mechanical Seal


 ANSI Tandem Solids Excluding Slurry Seal

Product Line Features

  • Simple cartridge seal installation.

  • ⅜” NPT flush connection allows for cooling and venting of seal.

  • ¼” NPT vent and drain connections provide differential sizing to minimize the potential of improper piping.

  • Non-sparking throttle bushing is positively retained to avoid pressure blow out, minimizing leakage in the event of seal failure.

  • Vantage seal glands include flush, vent, and drain connections and a close-clearance, non-sparking throttle bushing to direct any leakage to the drain connection.

  • Flush, vent, and drain connections available to be piped at multiple locations.

  • Angled gland connections allow for easier pipe fitting.

  • Setting clips provide positive axial and radial setting of the Vantage cartridge seal to ensure proper seal installation. The Vantage setting clips are easy to access for simple removal.

  • Convertible gland design to accept over four (4) design configurations.

VSSS3/VBSSS3 Features

  • Heavy-duty drive design with stationary single-spring isolated from process media.

  • Stationary external spring significantly improves performance in applications prone to clogging or sticking.

  • Offers quench options with carbon ring throttle bush or lip seal for diverse operational needs.

  • Designed with a non-clogging single-coil spring and positive mechanical drive for reliable performance.

  • Full convolution elastomeric bellows.

  • Available in ANSI Big/Taper and Standard Bore.

Stationary Single-Spring Single Cartridge Mechanical Seal
bottom of page