top of page

ANSI Rotating Welded Metal Bellows Single Cartridge Seal


 ANSI Tandem Solids Excluding Slurry Seal

Product Line Features

  • Simple cartridge seal installation.

  • Sleeve is isolated from process fluid.

  • 3/8″ NPT flush connection allows for cooling and venting of seal.

  • 1/4″ NPT vent and drain connections provide differential sizing to minimize the potential of improper piping.

  • Non-sparking throttle bushing is positively retained to avoid pressure blow out, minimizing leakage in the event of seal failure.

  • Vantage seal glands include flush, vent, and drain connections and a close-clearance, non-sparking throttle bushing to direct any leakage to the drain connection.

  • Flush, vent, and drain connections available to be piped at multiple locations.

  • Angled gland connections allow for easier pipe fitting.

  • Setting clips provide positive axial and radial settingof the Vantage cartridge seal to ensure proper seal installation. The Vantage setting clips are easy to access for simple removal.

  • Convertible gland design to accept over four (4) design configurations.

VRB3/VBRB3 Features

  • Rotating design uses centrifugal force for self-cleaning

  • Uniform 360° transfer of torque to the rotating face

  • Welded metal bellows replace the dynamic elastomer which can hang up the seal faces

  • No springs to clog or break

  • No fretting

  • Only three (3) static elastomers – eliminate seal failures caused by dynamic O-ring “hang up” and offers cost savings when upgrading to Perfluorelastomers.

ANSI Rotating Welded Metal Bellows Single Cartridge Seal
bottom of page